Our Preventative Maintenance Plans:

Contact us to customize your Generator Maintenance Plan and have the peace of mind that when a power outage occurs, you can rely on your generator to do its job.

Our maintenance plans can be scheduled by date or meter hour. See below for our comprehensive list of system and engine checks to keep your generator running at optimal capacity.

 

Cooling System:

  • Check for proper block heater operation

  • Check coolant level (Includes adding up to 2 gallon to fill to proper level)

  • Check coolant for proper freeze protection

  • Check coolant for proper PH (Includes adding up to 1 pint of conditioner as needed)

  • Replace coolant filter annually

  • Visual inspection of radiator for leaks

  • Inspect radiator cap for cracks and leaks

  • Check coolant hose condition

  • Check engine belts

  • Inspect water pump for signs of leakage

  • Starting Battery System:

  • Check and record battery charger float voltage

  • Record battery installation date

  • Visual inspection of battery condition

  • Check and tighten cable connections as needed

  • Check electrolyte level in battery

  • Check and record minimum dip voltage while cranking

  • Test and record battery cold cranking amp output

  • Check charger output current

Fuel System:

  • Test day tank pump for proper operation

  • Check condition of flexible fuel lines

  • Check fuel injection pump for leaks

  • Check vents on gas regulator for obstruction

Engine Ignition System:

  • Check distributor cap & rotor for signs of damage

  • Check ignition points for excessive wear

  • Check high voltage ignition wires for cracks or damage


 

Engine:

  • Check engine oil level

  • Check engine oil appearance

  • Drain and replace engine oil annually

  • Replace engine lube oil filters

  • Visual inspection for oil leaks

  • Inspect air filters for dirt and deterioration

  • Replace fuel filter annually or every 100 hours

  • Visual inspection of engine and generator mounts

  • Ensure proper operation of starter motor

  • Check governor oil level and add oil as needed

  • Check governor linkage

  • Check governor belt condition and tension

  • Check for proper governor response & stability

Operational Checks:

  • Visual inspection of meter & gauge readings

  • Check and record generator output voltage

  • Check and record AC current

  • Check and record frequency of generator

  • Check and record hours since last service

  • Check and record alternator output voltage

  • Check and record engine oil pressure

  • Check and record engine water temperature

  • Test pre-alarms for proper operation

  • Test engine safety shutdowns if accessible

  • Check intake and exhaust louver operation

Exhaust System:

  • Visually inspect exhaust system for leaks

  • Check exhaust drain valve for blockage

  • Inspect exhaust flex pipe for cracks and damage

  • Check rain cap for proper opening/closing

  • Additional Test Options

  • Load Bank Testing

  • Oil Analysis

  • Coolant Analysis

  • Diesel Fuel Analysis